POTENTIAL CAUSES OF THE PROBLEM

Moisture behind the surface of the color derived from one of the following reasons:

a) Leaks inside the wall
b) Lack of waterproofing on the roof
c) A series of hairline cracks caused moisture to enter behind the color
d) Increased moisture surroundings

SOLUTION

Creation of vapor is one of the most common problems in a house. Very often, mold signs appear on walls or celings, creating an aesthetic problem, which becomes a health problem in time.

STEP 1: Protect the floor, by covering all the area that is going to be painted

STEP 2: Clean the surface thoroughly from dust and loose particles with a spatula. A sandpaper is used for evening the surface

STEP 3: Where needed, STATUS 100% ACRYLIC PUTTY is applied, rubbing it with a sandpaper as soon as it gets dry

STEP 4: Application of deep penetration primer, GLX 292 FLEX PRIM, with a brush or roller

STEP 5: After the primer is dried (5 – 6 hours) STATUS KITCHEN & BATH is applied on the whole surface

STEP 6: After 4 – 5 hours apply the second layer of STATUS KITCHEN & BATH