Waterproofing

DSF 353 SUPER ELASTIC

Flexible 2-component, cement based, brushable sealing slurry

Hue: Grey, White

Packaging: (20 kg A + 10 kg B)

Consumption: 1.5 kg per layer. Requires two or more coats depending on the moisture load

Enlargement
Certifications
Waterproofing

DSF 353 SUPER ELASTIC

Flexible 2-component, cement based, brushable sealing slurry

Hue: Grey, White

Packaging: (20 kg A + 10 kg B)

Consumption: 1.5 kg per layer. Requires two or more coats depending on the moisture load

Description

DSF 353 SUPER ELASTIC is a flexible, brushable waterproofing mortar suitable for sealing interior and exterior surfaces. It consists of 2 components, a dry powder   (component Α) and a liquid dispersion (component Β). DSF 353 SUPER ELASTIC protects building constructions against ground moisture, surface or uprising moisture and water under pressure. It is resistant to frost; it has very good transpiration ability (vapor permeable) and does not corrode the steel reinforcement. It also has the ability to bridge micro cracks and exhibits excellent adhesion to various substrates.  It is suitable for application in drinking water reservoirs and for applying to surfaces in contact with food, according to W-347.

Application Fields

  • Suitable for sealing surfaces of concrete, brick, aerated concrete block, plaster, gypsum board, mosaic, wood , metal etc
  • Suitable for walls of over ground constructions
  • Suitable for basement walls and foundations
  • Suitable for shafts, tunnels, columns
  • Suitable for concrete tanks underground or above ground to be filled with water
  • Suitable for sealing surfaces subject to expansion, contraction and vibration such as balconies and terraces, inverted roofs, underground water tanks, swimming pools and water reservoirs, wet areas (bathrooms, kitchens), floors, wells, tunnels etc.
  • Suitable for protecting concrete structures by contact with seawater containing corrosive agents such as chlorides of sodium or calcium sulfates penetration of carbon dioxide, especially in cities and industrial areas, inadequate coverage of the metal reinforcement
  • Not recommended application of the product in environmental conditions of frost or heat, on surfaces subjected to movements and vibrations, during rain, when water leaks exist

Advantages

  • Excellent sealing
  • Bridging microcracks
  • Produced with quartz sand
  • Suitable for negative and positive pressures
  • Protection from contact with seawater
  • Resistance to moisture and vapor
  • Resistance to oil and solvents
  • Resistance to ageing
  • Non – flammable
  • Suitable for use in drinking water tanks and surfaces that come into contact with foodstuffs, in accordance with the W-347

Storage

The product is kept sealed for a year in dry storage areas.

Indicative use